Przekładki kół Eibach Pro-Spacer 2x30mm S90-4-30-037-B pro KIA CEE'D, CEE'D Station wagon Van, CEE'D SW, CEE'D Hatchback, CEE'D Sportswagon, Ceed, Ceed Station wagon Van, Ceed Hatchback Van, Ceed Sportswagon, Ev6, Optima, Optima Sportswagon, Pro CEE'D, Pr

S6: Only for use on the rear axle!
S9: ATTENTION - ALSO NOTE ON SERIES WHEELS! - When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is not possible to use the wheels or wheelspacers! Please check as follows: Stud lengh (e.g. 25mm) minus spacer-thickness (e.g.15mm) = 10mm exess length. So the cut out should have 11mm depth to take the original stud. Further the cut out should have minimum 22mmx22mm height/width to take the overlaping nut. It´s allowed to shorten the stud bolt with a saw (Maximal up to the beginning of the nut. - We recommend only to shorten the minimum lengh.) If shorten the stud bolts, first please consider that all wheels used at the car still will fit (e.g. summer- / winterwheels) ATTENTION: when using 15 mm wheelspacers at least 7 mm deep cut-outs are needed (at 20mm wheelspacers at least 2mm deep cut-outs are needed) as the nuts stand over the contact surface! It´s allowed to shorten the stud bolts